3D Measurement Prices in Dubai & UAE (2026)
Last updated: September 2026
Professional high-precision measurement services from AED 300.
Final pricing depends on project size, geometry, required deliverables, site conditions and turnaround time.
Send us your floor plan, drawing or site photos for a fast project-specific quotation.
Leica iCON iCS50
Starting from
AED 300
Measurement Prices at a Glance
- Small Measurement / Single AreaFrom AED 300
- Kitchen MeasurementFrom AED 400
- Wardrobe / Custom FurnitureFrom AED 400
- Room / Interior MeasurementFrom AED 500
- Apartment MeasurementCustom Quote
- Villa / Full Floor MeasurementCustom Quote
- Staircase / Complex GeometryCustom Quote
- As-Built SurveyCustom Quote
- Fit-Out MeasurementCustom Quote
- Property Area & Size VerificationCustom Quote
- Wall & Floor Flatness / Deviation SurveyCustom Quote
- CAD / DWG Measurement PackageCustom Quote
Prices shown are indicative starting prices and are not fixed quotations. Final pricing is confirmed after reviewing the project scope.
What You Actually Receive
A short look at real project outputs — a 3D as-built model, a measured 2D floor plan you can zoom into, and the CAD drawing package prepared from the survey.
Rotating 3D as-built model reconstructed from the on-site survey.
Dimensioned apartment plan. Zoom in to read every dimension down to the millimetre.
Walkthrough of the delivered AutoCAD drawing set.
What Is Included in a Professional Measurement?
Depending on the agreed scope, a professional measurement service may include:
- Professional on-site measurement
- Leica 3D Disto & iCS50 high-precision measurement
- Measured wall geometry
- Openings
- Niches
- Columns
- Selected floor and ceiling points
- Heights
- Relevant architectural elements
- CAD preparation
- DWG
- DXF where required
- PDF documentation
- 2D plans
- Elevations
- Sections
- Selected 3D geometry where required
Deliverables are defined according to the project scope and quotation. Not every AED 300 measurement automatically includes every deliverable listed above.
What Determines the Measurement Cost?
Project Size
Number of rooms, floors and measurement areas.
Geometry Complexity
Straight rooms require less measurement work than curved walls, staircases or complex architectural geometry.
Deliverables
2D plan, elevations, sections, DWG, DXF, PDF or selected 3D geometry.
Measurement Detail
The number and density of required measurement points depend on what will be designed, manufactured or verified.
Site Location
Dubai and other UAE locations may involve different travel requirements.
Turnaround
Urgent or accelerated delivery may affect pricing.
Example Measurement Projects
These are illustrative examples to give you a realistic starting point — not fixed quotations.
Small Kitchen
High-precision site measurement for kitchen design and production.
From AED 400
Built-In Wardrobe / Custom Joinery
Measurement of relevant walls, corners, openings and surrounding geometry.
From AED 400
Single Interior Room
Measured geometry with agreed 2D CAD documentation.
From AED 500
Apartment
Price calculated after reviewing the floor plan, number of rooms and required deliverables.
Custom Quote
Villa
Price calculated individually according to floor area, number of levels, geometry and required documentation.
Custom Quote
Complex Staircase
Curved or complex staircase geometry requiring a high number of measured points and fabrication-oriented CAD data.
Custom Quote
Technical Verification & QA/QC Measurement
Some projects require more than dimensions. Measured geometry can also be compared against drawings, design geometry or defined project tolerances to document actual site conditions. These services are quoted individually because the required reference, tolerance criteria and reporting format must be established before measurement.
Measurement & Deviation Check
Custom QuoteHigh-precision measurement of selected construction or interior elements and documentation of their actual geometry and dimensional deviations.
- Leica 3D Disto & iCS50
- Measured points
- CAD / DWG
- Deviation visualisation
- PDF / technical documentation
Potential applications
- Walls
- Floors
- Ceilings
- Openings
- Joinery interfaces
- Kitchens
- Wall panels
- Stone
- Glass
- Staircases
- Interior fit-out
QA/QC Measurement & Tolerance Report
Custom QuoteMeasured site conditions can be compared against defined dimensional requirements or project-specific tolerance criteria.
Possible applications
- QA/QC verification
- Contractor verification
- Dimensional inspection
- Fit-out verification
- Joinery verification
- Installation verification
- Pre-handover documentation
Before this service is quoted, the client should identify: what must be checked, what the reference is, what tolerance applies, which project specification or approved drawing applies, who will review or accept the report, and whether formal engineering, surveying or consultant sign-off is required.
Tolerance acceptance criteria may be defined by the project specification, approved drawings, contractual requirements, consultant requirements or other applicable project standards. Where formal certification or professional sign-off is required, this requirement must be identified before the survey.
Shop Drawing & Design-to-As-Built Verification
Custom QuoteCompare selected actual site geometry against approved shop drawings, design drawings, fabrication drawings or defined reference geometry.
- Approved drawing + actual site measurement
- Comparison
- Identified differences
Useful before
- Fabrication
- Installation
- Final coordination
- Remedial work
We provide measured information and comparison data. Acceptance and contractual compliance are determined by the responsible project parties.
Pre-Handover Measurement & Verification
Custom QuoteIndependent dimensional documentation of selected completed works before project handover.
Possible checks
- Selected dimensions
- Alignment
- Levels
- Openings
- Installed elements
- Selected construction geometry
- Comparison against defined reference information
Typical users include the client, interior designer, consultant, fit-out contractor, joinery contractor, main contractor and specialist subcontractor. This service is dimensional documentation and does not constitute statutory inspection or certification.
Installation Verification Measurement
Custom QuoteMeasurement of installed elements to document their actual position or geometry and compare them with defined project information where required.
Potential applications
- Joinery
- Wall panels
- Kitchens
- Stone
- Glass
- Partitions
- Architectural features
Measurement, Tolerance Check and Formal Sign-Off Are Not the Same Thing
Understanding this distinction is important when you plan a technical measurement project.
Measurement
What is actually there?
We measure and document the actual geometry.
Deviation / Tolerance Check
How different is it from the defined reference?
Measured geometry is compared with the supplied reference and defined tolerance criteria.
Formal Compliance / Sign-Off
Is the work formally accepted?
Depending on the project, formal acceptance may require a consultant, engineer, licensed surveyor or other authorised professional.
Does High Measurement Accuracy Mean a 1 mm Construction Tolerance?
Short answer
No.
Measurement accuracy describes the measurement process. Construction, manufacturing and installation tolerances are separate requirements.
The acceptable tolerance depends on the element, material, project specification, fabrication method and applicable project requirements.
The purpose of high-precision measurement is to provide reliable site information so the responsible project team can make informed technical decisions.
Get a Quick Quote
Send us basic project information and we can calculate the measurement cost.
Upload floor plan
Send a PDF, JPG or PNG of your floor plan on WhatsApp.
Approximate area
Tell us the approximate area in m² and how many rooms.
No drawings?
Send site photos on WhatsApp and we will work from those.
Technical verification?
Share your project specification, approved drawing, shop drawing or reference drawing.
For technical verification, also tell us
- What needs to be checked
- Required tolerance, if known
- Required deliverables
We do not process file uploads on this page. The button opens WhatsApp with your details so you can attach your floor plan, drawing or photos directly.
Why Is Professional Measurement Different from Taking a Few Dimensions?
A conventional laser distance meter can provide individual distances, and for many simple tasks that is sufficient. However, complex interior, joinery and fit-out projects may require understanding the relationship between multiple points and surfaces.
Leica iCON iCS50
- Is the corner actually 90°?
- Are two walls parallel?
- Does the distance change from floor level to ceiling level?
- Is a wall in one plane?
- How does a staircase curve through multiple levels?
- Does the actual construction match the approved drawing?
This is where structured high-precision measurement becomes valuable.
Who Uses Our Measurement Services?
Frequently Asked Questions
How much does 3D measurement cost in Dubai?
Professional 3D measurement in Dubai starts from AED 300 for a small single area. The final cost depends on project size, geometry, required deliverables and turnaround. Larger projects such as apartments and villas are quoted individually.
What is the minimum measurement price?
The indicative starting price for a small measurement or single area is AED 300. This is a starting point, not a fixed quotation.
How much does kitchen measurement cost in Dubai?
Kitchen measurement typically starts from AED 400 for high-precision site measurement suitable for design and production. The exact price depends on the layout and required CAD deliverables.
How much does villa measurement cost?
Villa measurement is quoted individually according to floor area, number of levels, geometry and required documentation. Send us the floor plan for a project-specific quotation.
How much does an apartment measurement cost?
Apartment measurement is calculated after reviewing the floor plan, number of rooms and required deliverables, so it is provided as a custom quote.
How much does staircase measurement cost?
Curved or complex staircases require a high number of measured points and fabrication-oriented CAD data, so they are quoted individually as a custom quote.
Is DWG included in the measurement price?
DWG can be included depending on the agreed scope. Deliverables such as DWG, DXF, PDF, 2D plans, elevations and sections are defined in the quotation.
Can you provide DXF files for fabrication?
Yes. DXF files can be provided where required for fabrication, defined according to the project scope.
Can you measure with approximately ±1 mm accuracy?
The Leica 3D Disto provides measurement accuracy up to approximately ±1 mm depending on measurement conditions and scope. This describes the measurement process, not a construction tolerance.
What affects the final measurement cost?
Project size, geometry complexity, required deliverables, measurement detail, site location and turnaround all affect the final measurement cost.
Can I send a floor plan for a quotation?
Yes. Sending a floor plan, drawing or PDF is the fastest way to receive a project-specific quotation.
Can I get a quote from site photos?
Yes. If you have no drawings, send site photos on WhatsApp and we can prepare an indicative quotation.
Do you provide QA/QC measurement?
Yes. We provide QA/QC measurement where site conditions are compared against defined dimensional requirements or project-specific tolerance criteria, quoted individually.
Can you measure construction deviations?
Yes. We measure selected elements and document their actual geometry and dimensional deviations against a supplied reference.
Can you compare actual site dimensions with shop drawings?
Yes. We compare selected actual site geometry against approved shop drawings, design drawings or defined reference geometry and report the identified differences.
Can you provide a tolerance report?
Yes, where the reference and tolerance criteria are defined in advance. Acceptance criteria are set by the project specification, approved drawings or other applicable requirements.
Can you perform pre-handover dimensional verification?
Yes. We provide independent dimensional documentation of selected completed works before handover. This is documentation and does not constitute statutory inspection or certification.
Do you provide certified engineering or surveyor sign-off?
3D Measurement provides professional measurement and documentation according to the agreed scope. Where formal engineering, surveying, consultant or statutory certification/sign-off is required, this requirement should be identified before the survey so the appropriate qualified party and reporting format can be determined.
Explore Related Services
See detailed information and typical deliverables for each measurement service.
Send Your Project for a Fast Quotation
Professional measurement from AED 300, plus measured geometry, CAD documentation, deviation checks and technical verification for interior, fit-out and joinery projects. Send your floor plan or photos and receive an exact quotation.